Skip to content

Super Blue Pill

Pasted image 20230316171444.png Pasted image 20230316171505.png Pasted image 20230316171532.png

Overview

The board uses an STM32F103C8T6 in a LQFP48 package. The front UART1 pins are Serial1 in Arduino.

Uploading Code

dfu-util -a 2 -RD "C:\...\AppData\Local\Temp\arduino-sketch-1A9B...\Blink.ino.bin"

Burning Bootloader

For the board to work (properly) in Arduino, you need to burn the latest STM32duino bootloader, which can be found here: • https://github.com/rogerclarkmelbourne/STM32duino-bootloader/tree/master/binaries • The board uses the 'generic_boot20_pa1_button_pa8.bin' binary.

See the 'Introduction to the STM32 Blue Pill' page under 'References' for instructions on how to update the bootloader.

Pasted image 20230316171640.png

UART Pins

Pasted image 20230316171747.png

Last update: 2023-03-30